Soundcore Motion Q Manual Del Propietário página 6

EN
Plugging in an audio cable will automatically switch to Aux mode.
When using AUX mode, control audio playback via the connected device.
Volume up / down
Charge your Soundcore Motion Q
Slow flashing red Low power
Steady red Charging
Off
Fully charged
07
Use the included USB cable to charge your Soundcore Motion Q
and make sure it is fully charged before first use.
Disconnect your speaker from charger when fully charged. Do
not charge your speaker for extended periods.
When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V 1 A
Audio output: 8 W x 2
Battery capacity: 2600 mAh
Charging time: 3.5 hours
Play time (varies by volume level and content): 10 hours
Size: 88 x 88 x 108mm / 3.5 x 3.5 x 4.3 in
Weight (without packaging): 416g / 14.7 oz
Bluetooth version: V4.2 + EDR
Range: 20 m / 66 ft
EN
08