Maintenance; Instructions For Returning By Mail; Method Of Maintenance; Cleaning The Cover - Promax 8 plus Manual Del Usuario Y Operador

INSTRUCTION MANUEL. PROMAX-8+

5 MAINTENANCE

This part of the manual describes the maintenance procedures and the
localisation of faults.
5.1

Instructions for returning by mail

Instruments returned for repair or calibration, either within or outwit the
guarantee period, should be forwarded with the following information: Name of the
Company, name of the contact person, address, telephone number, receipt (in the case
of coverage under guarantee) and a description of the problem or the service required.
5.2

Method of maintenance

The method of maintenance to be carried out by the user consists of cleaning
the cover and changing the battery. All other operations should be carried out by
authorised agents or by personnel qualified in the servicing of instruments.

5.2.1 Cleaning the cover.

To clean the cover, remove the battery from its housing.
Do not use scented hydrocarbons or chlorized solvents. Such products may attack the
plastics used in the construction of the cover.
The cover should be cleaned by means of a light solution of detergent and
water applied with a soft cloth. Dry thoroughly before using the system again.
To clean the contacts, use a dry cloth. Do not use a wet or damp cloth.
Do not use for the cleaning of the front panel and particularly the viewfinders, alcohol or
its derivatives, these products can attack the mechanical properties of the materials and
diminish their useful time of life.
May 2001
CAUTION
CAUTION
CAUTION
CAUTION
Page 39