Inserting And Removing Burr Instruments - B.A. International BA Serie Instrucciones De Uso

6401553.book Seite 28 Montag, 13. Juni 2016 4:27 16
5 Operation
A
28
Operating Instructions BA ULTIMATE POWER + / BA ULTIMATE
Attaching the BA ULTIMATE POWER + / BA ULTIMATE
Attaching product name Attaching_Product name
✔ The motor is at a standstill.
with ISO slider
1. Insert the instrument until it snaps into place.
2. When using a motor with a light groove (A): turn the instrument until
the ISO slider clicks into place.
Removing the BA ULTIMATE POWER + / BA ULTIMATE
Product name _ Remove Remove
✔ The motor is at a standstill.
➢ Detach the instrument. Do not pull on the supply hose while doing
this.
5.2

Inserting and removing burr instruments

IMPORTANT: Check the push button to make sure it moves freely!
Free movement of the pushbutton
NOTICE! Use only burrs and diamond polishers that are sharp and
Use only undamaged burrs
undamaged. Use clean burrs and diamond polishers to avoid dirt in the
clamping system.
64 01 553 D3551.201.03.03.02