Functional Description; Name Of Parts; Specifications - Metabo HPT CC 12Y Manual De Instrucciones

English
NOTE
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance
of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety
instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own
power tool.

NAME OF PARTS

Base
Cutting wheel

SPECIFICATIONS

Motor
Power Source
Current
Rated Speed
outer dia. × hole dia. × thickness
Wheel
peripheral speed
Weight
WARNING
Always use only the bonded reinforced wheel with the dimensions specifi ed in the SPECIFICATIONS table.
8

FUNCTIONAL DESCRIPTION

Wheel guard
Gear cover
Housing
Nameplate
Pipe handle
Fig. 1
Single-Phase Series Commutator Motor
Single-Phase 120 V
12" (305 mm) × 1" (25.4 mm) × 7/64" (2.8 mm)
16,000 ft/min (4,800 m/min)
24 lbs (10.8 kg)
Handle
Switch
Brush cap
15 A
5,400/min.