Chamberlain MyQ Garage Guia Del Usuario página 5

ALTERNATE METHOD: Connect with WPS (Wi-Fi Protected Setup)
If your router is using WEP security setting, change it to WPA or WPA2.
1. Plug in the Wi-Fi Hub. The blue LED will blink, the Wi-Fi Hub is ready to be
connected.
2. Press and release the
3. Press the router's WPS button to activate WPS mode. It may take a few minutes for
the Wi-Fi Hub to connect to the router. The Wi-Fi Hub's green LED will turn solid
when the Wi-Fi Hub is connected to your network.
4. Download the Chamberlain MyQ
Play. NOTE: Do not operate the garage door opener until installation has been
completed.
5. If the green LED is glowing solid, proceed to step 2 Installation.
BUTTON on the Wi-Fi Hub. The blue LED will turn solid.
®
Home Control App from the App Store or Google
Blue LED
BUTTON
5
WPS Mode