Troubleshooting; Technical Data; Disposal - Profi Cook PC-PSM 1031 Instrucciones De Servicio

Troubleshooting

Unit does not work
Possible cause:
The body of the mill is assembled incorrectly.
Action:
Check that the body is assembled correctly:
• The drive of the motor part needs to sit pre-
cisely on the shaft in the storage chamber.
• The contact pins need to be placed precisely
on the contact screws on the storage chamber.
• The arrow on the housing body must point to
the symbol.
Possible cause:
The batteries are spent.
Action:
Change the batteries. Use 4 new MIGNON/AA/R6
type batteries.
Blocked grinding mechanism
1. Turn the mill with the wingnut facing upwards.
2. Unscrew the wingnut slightly by turning it anti-
clockwise.
3. Push the switch until the grinder disengages.
4. Adjust the desired grinding grade.

Technical Data

Model: ...............................................PC-PSM 1031
Power supply: .... 4 batteries 1.5 V Type "AA" / "R6"
Net weight: ...................................................0.39 kg
The right to make technical and design modifica-
tions in the course of continuous product develop-
ment remains reserved.
This device has been tested according to all
relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives,
and has been constructed in accordance with the
latest safety regulations.
22

Disposal

Meaning of the "Wheelie Bin" Symbol
Remove the batteries before disposing of the ap-
pliance.
Take care of our environment, do not dispose of
electrical appliances via the household waste.
Dispose of obsolete or defective electrical appli-
ances via municipal collection points.
Please help to avoid potential environmental and
health impacts through improper waste disposal.
You contribute to recycling and other forms of
utilization of old electric and electronic appliances.
Your municipality provides you with information
about collecting points.