Storage; Troubleshooting; Technical Data - Profi Cook PC-MS 1009 Instrucciones De Servicio

• Wash the attachment in warm sudsy water.
Loosen stubborn residues with a cleaning
brush. Rinse in clean water.
• You can also wash the attachment in the dish-
washer. Ensure that the cleaning agents (clean-
ing and rinsing agents, salt) are not overdosed.
• Keep the attachment in a safe place. Otherwise
it may get lost.

Storage

• Clean the device as described and allow to dry
completely.
• We recommend that you keep the appliance in
the original packaging if the appliance will be
not used for long periods.
• Always keep the appliance out of the reach of
children in a dry, well ventilated place.

Troubleshooting

Malfunc- Cause
tion Pos-
sible
The appli- Does the jug
ance does stand properly
not work/ on the base?
the motor
does not
Is the appliance
turn
switched on?
Is the mains
socket defec-
tive?
The milk Is frothing
doesnot attachment
foam "B" properly
attached?
Is the attach-
ment blocked?
Is there too little
milk in the can?
Malfunc-
tion Pos-
sible
The appli-
ance turns
off too
early when
stirring or
frothing
repeatedly.
Model: ...................................................PC-MS 1009
Power supply: .....................................230 V~, 50 Hz
Power consumption: ....................................... 600 W
Protection class: .......................................................Ι
Net weight: ....................................... approx. 1.02 kg
Remedy
Subject to change without prior notice!
This device complies with all current CE directives,
Check if the
such as electromagnetic compatibility and low volt-
jug is properly
age directive and is manufactured according to the
placed on the
latest safety regulations.
base.
Try a different
socket
Check the at-
tachment.
There should
be between 60
and 120 ml in
the can
Cause Remedy
The appliance Leave the
has not cooled appliance to
down. cool down for
2 minutes (see
"Button Func-
tions").

Technical Data

33