Technical Data; Assembly / Installation; Commissioning - ABNOX AXKP 1 Manual De Instrucciones

Technical Data

Container
Model
Container ID (mm)
Container height (mm)
Min./Max. temperature (C°)
Outlet pressure (media) at a
working pressure of 6 bar
Outlet pressure (media) at a
working pressure of 10 bar
Conveyed amount for dual
stroke (cm )
3
Delivery rate at the pump
outlet (cm /min)
3
Optimal inlet working pressure
(compressed air) (bar)
Max. air consumption (l/min.)
Internally threaded connection
(compressed air)
Externally threaded
connection (media) P

Assembly / Installation

The product is to be set up or installed at the inten-
ded use site under due consideration of the following
conditions:
• At the location and site all applicable provisions of
law must be clarified and compliance with them
assured.
• The ground and space relations are to be clarified
prior to set-up/installation of the product in order
to assure safe operation for the personnel and the
product long-term. The product must be set-up/
installed so that safe, permanent operation is
assured.
• The product may only be set up and commissioned
by specially trained technicians.
• The product is constructed for rooms that are
protected from the influence of the weather
(industry standard).
• The operation and storage in aggressive or humid
environments or outdoors can lead to corrosion
damages.
1-5kg 1-5kg
AXKP1- S10 AXKP1-S25
80 - 210 80 - 210
285 285
10/40 10/40
60 144
100 233
16 17
1720 1295
6 6
150 217
G ¼" G ¼"
G ¼" G ¼"
1-5kg
AXKP1-S60
80 - 210
285
10/40
310
516
6
465
6
217
G ¼"
G ¼"

Commissioning

The system was fully tested before being shipped.
NOTE
Ensure that all screws and hoses
are tightened properly (leaks).
CAUTION
Never remove the height locking
mechanism without supporting the
upper frame (Figure B / no. 7). This
could result in injuries and/or material
damage.
1. Remove all packaging from the system before
commissioning.
2. Secure the upper frame (Figure B/no. 7) with the
height locking mechanism (Figure E/no. 8). The
locking height depends on the container or cartrid-
ge height.
Cartridge Cartridge
AXKP1-S10 AXKP1-S25
51 51
235 235
10/40 10/40
60 144
100 233
16 17
1720 1295
6 6
150 217
G ¼" G ¼"
G ¼" G ¼"
EN
23