Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setup
You can adjust the way your camera is setup with 13 setup option:
Exposure, ISO, White Balance, Sharpness, Quality, Digital Zoom, Date, Beep sound, Auto
Power off, Language, Frequency, Format, Default Setting and Cancel.
1.
Press the OK button.
2.
Press the Right/Left button to select the icon
3.
The Setup menu appears in the center of the LCD.
4.
Press the Up/Down button to select one of the setup options:
Exposure
This setting allows you to control the brightness of your images.
1.
Press the OK button.
2.
Press the Up/Down buttons to select an Exposure value (from 3 brightest to -3 darkest)
from the Menu.
3.
Press the OK button to confirm, save and exit to the camera standby mode.
4.
The Exposure icon for the option you selected appears on the bottom of the LCD.
ISO
This is a special function that allows you to compensate the light conditions when the light source
is not good and you also specifically do not wish to use flash or tripod. When using ISO
sensitization, please choose the low value ISO to prevent spots or blotches appearing on your
photo.
1. Press the Up/Down buttons to select the ISO option in the Setup menu.
2. Press the OK button.
3. Press the Up/Down buttons to select an ISO value from the Menu that appears:
4. Press the OK button to confirm, save and exit to the camera standby mode.
5. The ISO icon for the option you selected appears on the bottom of the LCD.
White Balance
This setting allows the camera to adjust the color of your photos according to the color of your
light source.
1. Press the Up/Down buttons to select the White Balance option in the Setup menu
2. Press the OK button.
3. Press the Up/Down buttons to select a White Balance option from the Menu that appears:
Auto
Day light
4. Press the OK button to confirm, save and exit to the camera standby mode.
5. The LCD screen will be adjusted as per the White Balance option you selected.
Cloudy
Fluorescent
.
Incandescent
EN
P-12
Publicidad
Tabla de contenido
