pj PC-4324D Manual De Usuario página 42

4. Press the OK button to confirm, save the changes and exit.
Beep sound
You can set the beep sound function On or Off.
1. Press the Up/Down button to select the Beep sound option in the Setup menu.
2. Press the OK button.
3. Press the Up/Down button to select On or Off.
4. Press the OK button to confirm, save and exit to the camera standby mode.
Auto Power Off
By default, if your camera is idle for 60 seconds it will automatically be powered off. Use the
Auto Power Off option to change this setting:
1. Press the Up/Down button to select the Auto Power Off option in Setup menu.
2. Press the OK button.
3. Press the Up/Down buttons to select Auto Power Off option from the Menu that appears:
4. Press the Up/Down button to select a time that the camera will automatically power off.
Note: If you select None, the camera will not be powered off until the battery power is depleted
or the camera is turned off manually.
5. Press the OK button to confirm, save and exit to the camera standby mode.
Language
Your camcorder supports many kinds of languages.
1. Press the Up/Down button to select the Language Menu.
2. Press the Up/Down button to select English/French/Spanish!
3. Press the OK button to confirm, save and exit.
Frequency
Select the frequency for the local environment. Generally, 60HZ is for the U.S. and 50HZ for
Europe and Japan. The default setting is 60HZ.
1. Press the Up/Down button to select the Frequency option from the Setup menu.
2. Press the OK button.
3. Press the Up/Down button to select a Frequency option from the Menu that appears:
4. Press the OK button to confirm, save and exit to the camera standby mode.
Format
This function will format the memory card and will erase all files in memory including files that
have been protected.
Important: Please use this function with caution. Once formatted all the images stored in the
memory will be erase. This process is irreversible. Please download all images to the PC
before formatting the card.
1. Press the Up/Down button to select the Format option from the Setup menu.
2. Press the OK button.
3. Press the Up/Down button to select OK.
EN
P-14