pj PC-4324D Manual De Usuario página 55

Appendix B: Troubleshooting
Q: I have taken photos but my computer says, "No photos in camera." What do I do?
A: First ensure that you have in fact taken photos. Press the Shutter button a few times to take
some sample photos and then try downloading them again.
If you still get a "no photos" error this may mean that your computer may not meet the minimum
EN
system requirements:
At least a Pentium III 300Mhz, AMD Athlon 300Mhz or a Celeron 400MHz or higher as well as at
least 128 MB ram. Please note that the older AMD K6 processors will not work. More information
about determining your computer's specifications can be found in the General Computer
Information section.
Q: How do I make sure I don't lose important pictures?
In order to use your camera properly you will need to insert a SD card of up to 32GB. All your
images will be stored on this card. It is recommended to download the images from the card as
often as possible, so as to free up space on the card. This also is a backup if your card gets lost
or damaged.
The test photos are saved in limited SDRAM, which requires a constant electric current to store
your photos. Should your camera lose power (for instance if the battery dies or run out of power)
the test pictures will be lost.
Q: If I have a MAC, will the device work?
The device will work as a removable drive on Mac OS X (10.5.x or higher). And images can be
accessed manually.
A00-110813
P-27