Sound; Display; Software Update - Loewe SoundVision Instrucciones De Manejo

Loewe SoundVision
Instructions for Use
Start-up

Sound

You can make various sound settings in the Sound menu.
Call up Options menu.
Call up Sound menu.
Set value or option.
Treble Settings for the high frequencies
Bass Settings for the low frequencies
Balance Emphasis on the left/right channel
Sound Mode
You can select various Sound Modes for the sound reproduction
Set value or option.
Pop The sound reproduction is optimised for pop music
Classical The sound reproduction is optimised for classical
music
Speech The sound reproduction is optimised for speech
Manual The sound reproduction can be set individually
Loudness
If you activate the setting, the frequency response will be corrected in
relation to the volume (hearing compensated volume).
ON Hearing compensated volume adjustment on
OFF Linear frequency response
Automatic volume
You can use this function to limit the dynamics (in other words, the
difference between the loudest and quietest sounds). In this way, you
can also play your music with lower volume differences (e.g. at night).
OFF Audio signals are played with the full dynamic
range
ON Select this option if you wish to play audio
signals with lower volume differences
Bass enhancement
You can emphasise a bass playback.
OFF Audio signals are played with the normal sound
settings
ON Select this option if you wish to emphasis bass
playback
You can use the Defaults function to restore the default
settings of the sound settings.
- 32 -

Display

You can make various screen settings in the Display menu.
Call up Options menu.
Call up the Settings menu.
Select the Display option.
Set value or option.
Autom. dimming If you activate this setting, the display will be
dimmed after an adjustable time
Brightness Brightness of the display
Sec. until ... Time until the Play menu is shown

Software update

You can download a software update suitable for your unit from the
Internet, if required.
Call up Options menu.
Call up the Settings menu.
Select the Software Update option.
Set Source - Internet or USB option.
You can use the Check function to check whether new
software is available for the unit.
If this is the case, the version number of the current
version and the new version will be displayed.
The update process is started with the Update function.
Depending on the speed of the Internet connection,
the process lasts up to 70 minutes. The progress of the
update is shown.
A corresponding menu is shown after a successful
update. Confirm the Reboot function. The unit now
restarts.
➠
You can download a current version of the instructions for use as
a PDF file from the Loewe web page:
– Library Instructions for Use
a software update.
http://support.loewe.tv/de
This is especially recommended after