Principles Of Operation - Whale BP2082B Manual De Instalación Y Funcionamiento

3. LIST OF CONTENTS AND LIST OF DIAGRAMS
1. TYPICAL INSTALLATION
2. SPECIFICATION
3. CONTENTS AND LIST OF DIAGRAMS
4.

PRINCIPLES OF OPERATION

5. TO THE USER
6. TO THE FITTER
7. APPLICATION
8. WARNINGS
9. PARTS LIST
10. OPTIONAL EXTRAS
List of Diagrams:
Fig 1a Typical Installation as a High Capacity Grey Waste Pump for use with Gulley IC
Fig 1b Typical Installation as a High Capacity Grey Waste Pump for use with Two Way
Manifold IC
Fig 2 Typical Installation as a High Capacity Grey Waste Pump used with non-whale
accessories
Fig 3 Pump Orientation
Fig 4 Gulper® IC installation
Fig 5 Install P Clamp
Fig 6a Wiring Gulper® IC to Whale IC Accessories
Fig 6b Wiring Gulper® IC to Traditional Switch - non Whale IC Accessories
Fig 7 Connecting Switching Cable Through Bulkhead
Fig 8a STEP 1- Connect Deutsch Connectors
Fig 8b STEP 2 - Connect adaptor with 2 spades
Fig 9 Secure Pipework
4. PRINCIPLES OF OPERATION
IC - Intelligent control technology
At the heart of every Whale® IC product lies innovative electronic control circuitry built in. This
enables IC sensor accessories to communicate directly with IC pumps to control their performance.
These accessories send signals to built-in intelligent software which then control the pumps to react
as required.
Gulper® IC
The Gulper® IC fully automatic self-priming pump is designed to pump waste water from a shower
tray/galley sink, (either overboard or to a holding tank) or as a remote mounting bilge pump. Output
capacity depends on installation and operating conditions.
GREY WASTE APPLICATION - WITH WHALE® IC ACCESSORIES
When Gulper® IC is installed as a grey waste pump with Whale® IC Grey waste accessories,
electrical signals are sent from the Gulley IC or Two Way Manifold IC only when grey waste water
needs to be pumped out. (See Figs 1a and 1b)
GREY WASTE APPLICATION - WITH NON WHALE® IC ACCESSORIES
Gulper® IC may also be installed as a grey waste pump in conjunction with non whale accessories.
This allows the installer to fit low current controlled switching which prevents burn outs from high
current. (See Fig 2)
5. TO THE USER
Read the following instructions carefully.
11. INSTALLATION
12. PLUMBING
13. INSTRUCTIONS FOR USE
14. MAINTENANCE
15. HELPFUL HINTS
16. TROUBLE SHOOTING
17. WINTERISING
18. PATENTS/ TRADEMARKS
19. WARRANTY STATEMENT
20. EU DECLARATION OF CONFORMITY,
APPROVALS
5