Set-Up/Operation; Weee Information - Dörr DL-400 Manual De Instrucciones

SET-UP/OPERATION

1. Screw in the 4 supplied LED bulbs into the bulbs sockets (2).
2. Plug in the supplied power cord into the power cord socket (6). Connect the power
cord to a power outlet. The LED power indicator (9) lights up red.
3. With the On/O switches (11) the 4 LED bulbs can be switched on or o individually.
4. After use turn o all the LED bulbs and disconnect from power source.
MAINTENANCE/CLEANING/STORAGE
Changing the Fuse
In the case the fuse is blown, turn o the device and disconnect from power source.
Unscrew the screw cap (10) of the fuse compartment. Replace the glass tube fuse type
F1AL250V, 5A (commercially available ). Screw the screw cap on again.
Cleaning and storage
Never use aggressive cleansing agents or benzine to clean the device. We recommend a
soft microfi ber cloth to clean the outer parts of the device.
MAKE SURE TO TAKE THE DEVICE OFF POWER BEFORE CLEANING!
Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of
reach of children. Keep away from pets.
SPECIFICATIONS
REFLECTOR
Diameter 16" (ø approx. 41 cm)
Fuse Glass tube fuse type F1AL250V, 5A
Bulb socket 4x E27
Material Metal
Weight approx. 1100 g (w/o LED bulbs)
Di usor cover
For more soft and di use illumination,
put the supplied di usor cover over the
refl ector.
Mounting a refl ector umbrella
(optional)
To mount a refl ector umbrella (optional)
to the DÖRR DL-400, insert the umbrella
pole into the refl ector slot (3).
DÖRR optionally o ers a variety of re-
fl ector umbrellas.
LED BULBS
Model
Item No.
Power
Colour temperature
Luminous fl ux per LED bulb
Illuminance
Colour rendering index Ra
Operating voltage
Energy e ciency class
Beam angle
Operating life
Socket
Dimensions
Weight
CONTENT
Model DÖRR DL-400
4x10W
Item No
373470
Content 1x 16" Refl ector
1x Power cable
1x Fabric di usor
X
4x 10W LED Bulb

WEEE INFORMATION

The Waste Electrical and Electronic Equipment Directive (WEEE
Directive) is the European community directive on waste electrical
and electronic equipment, which became European law in Februa-
ry 2003. The main purpose of this directive is to prevent electronic
waste. Recycling and other forms of waste recovery should be en-
couraged to reduce waste. The symbol (trash can) on the product
and on the packing means that used electrical and electronic pro-
ducts should not be disposed of with general household waste. It
is your responsibility to dispose of all your electronic or electrical
waste at designated collection points. Disposing of this product
correctly will help to save valuable resources and it is a signifi cant
contribution to protect our environment as well as human health.
For more information about the correct disposal of electrical and
electronic equipment, recycling and collection points please con-
tact your local authorities, waste management companies, your
retailer or the manufacturer of this device.
ROHS CONFORMITY
This product is compliant with the European directive 2011/65/
EU of June 08, 2011 for the restriction of use of certain hazardous
substances in electrical and electronic equipment (RoHS) and its
amendments.
CE MARKING
The CE marking complies with the European directives.
5
DÖRR DL-400 4x10W DÖRR DL-400 4x25W
373470 + 373475 373472 + 373476
4x 10W 4x 25W
5.000 K 5.500 K
800 lm 2.000 lm
1.000 lx/1m 3.200 lx/1m
85
220-240V/50-60Hz
A
180°
approx. 10.000 hours
E27
approx. ø 93 mm, approx. ø 94 mm,
height 145 mm height 150 mm
approx. 115 g approx. 240 g
DÖRR DL-400 DÖRR DL-400
4x25W 4x10W 2-Pack
373472 373475
2x 16" Refl ector
2x Power cable
2x Fabric di usor
2x Light stand
4x 25W LED Bulb 8x 10W LED Bulb 8x 25W LED Bulb
Instruction manual
85
90°
DÖRR DL-400
4x25W 2-Pack
373476