Assembly Instructions; Control Panel - DSR Industrial INC-812A Manual Del Usuario

9.

ASSEMBLY INSTRUCTIONS

• No assembly required
10.

CONTROL PANEL

10.1 DIGITAL DISPLAY BUTTON
Use this button to set the function of the digital display to one of the follow-
ing:
• BATTERY %:
charge of the battery connected to the charger battery clips.
• VOLTAGE:
clips in DC volts.
10.2 BATTERY TYPE BUTTON
Use this button to set the type of battery to be charged to one of the fol-
lowing:
• Regular
in cars, trucks and motorcycles. These batteries have vent caps and are
often marked "Low Maintenance" or "Maintenance-free". This type of
battery is designed to deliver quick bursts of energy (such as starting en-
gines) and have a greater plate count. The plates will also be thinner and
have somewhat different material composition. Regular batteries should
not be used for deep cycle applications
• Deep-Cycle
ally marked as "Deep-Cycle" or "Marine". Deep-cycle batteries are usually
larger than the other types. This type of battery has less instant energy
but somewhat greater long-term energy delivery than regular batteries.
Deep cycle batteries have thicker plates and can survive a number of
discharge cycles.
The digital display shows an estimate of the percent of
The digital display shows the voltage at the charger battery
– Set button to STANDARD. This battery type is usually used
– Set button to STANDARD. Deep-cycle batteries are usu-
6
• •