About Remaining Battery Indicator - Metabo RP 3608DA Manual De Instrucciones

Aspiradora inalámbrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Cardboard
Bend
Stopper
Suction opening
(Inside of the tank)
FLOAT MECHANISM
This appliance is equipped with a fl oat mechanism
to prevent water from entering in the motor when it
sucks in more than a specifi c quantity of water. When
the fl oat operates not to suck in water, turn off the
switch promptly and throw away water in the tank.
WARNING
With the fl oat working, do not continue
operation. Otherwise the temperature of the
motor may rise abnormally causing troubles
such as deformation of parts or motor burnout.
Avoid sucking in
detergent or foams. Before the fl oat works,
foams may spurt from the air outlet. If you
continue to use the appliance as it is, it will lead
to electric shock or failure.
ABOUT REMAINING BATTERY
INDICATOR
1.
Battery
You can check the battery's remaining capacity by
pressing the remaining battery indicator switch to
light the indicator lamp. (Fig. 30, Table 6)
The indicator will shut off approximately 3 seconds
after the remaining battery indicator switch is
pressed.
20
Fold
90°
Fig. 28
Rubber
packing
Cardboard
Paper fi lter
Fig. 29
foaming liquid such as
It is best to use the remaining battery indicator as
a guide since there are slight diff erences such as
ambient temperature and the condition of the battery.
Also, the remaining battery indicator may vary from
those equipped to a tool or charger.
Remaining battery
indicator lamp
Display panel
Table 6
State of lamp
Battery Remaining Power
Lights ;
The battery remaining power is
over 75%.
Lights ;
The battery remaining power is
50% – 75%.
Lights ;
The battery remaining power is
25% – 50%.
Lights ;
The battery remaining power is
less than 25%.
Blinks ;
The battery remaining power
is nearly empty. Recharge the
battery soonest possible
Blinks ;
Output suspended due to high
temperature. Remove the battery
from the tool and allow it to fully
cool down.
Blinks ;
Output suspended due to failure
or malfunction. The problem may
be the battery so please contact
your dealer.
Remaining battery
indicator switch
Fig. 30

Publicidad

Tabla de contenido
loading

Tabla de contenido