BH HI POWER SK Serie Instrucciones De Montaje Y Utilización página 72

This software also allows you to set a maximum speed.
With the monitor switched on, the top LED array (A), Fig.2, will display the profile and the letter "M" for
manual.
To enter the setup menu once this is displayed, press and hold the STOP key down and then press ENTER,
hold both keys down for approximately 4 seconds.
The first thing to be displayed on the screen is the software
version number for the machine.
Press the ENTER key.
The next screen displays the reference number for the
hardware.
Press the
ENTER key
and the
following screen will appear, displaying the DG inclination or the SPD speed program.
Select the desired program by pressing the INCLINE /INCLINE
Press the ENTER key.
If you have chosen the inclination program, the displayed speed profiles will become degrees of inclination
for the chosen program.
The following
screen allows
us to switch
between Imperial (ML) or Metric (kM) units by pressing the INCLINE /INCLINE
Press the ENTER key.
The following screen allows us to select the maximum
machine speed of 20 to 25 km/h or 10.6 to 15.6 mph by
pressing the INCLINE + / INCLINE – keys.
Press the ENTER key.
The following screen displays information about the total
distance travelled. This is the sum of all the users.
Press the ENTER key.
This screen displays information about the total time that the
treadmill has been operating.
Press the ENTER key to exit to the main menu.
The treadmill is already preset and ready to use.
See pre-set program graphs at the end of this manual.
keys.
15
SK
LINE LINE
LINE LINE
sportkoncept
keys.