Micro kickboard Manual Del Usuario página 17

Maintenance
Changing the rollers
The rear wheel must be changed according to riding style, weight of the rider and condition of the riding surface. Change
the wheel as so on as its worn.
The front wheels can be changed round when the first signs of wear are evident (the treads have become uneven). When
doing this, position the wheels so that the worn surface faces out. This does not apply far pneumatic tyres.
When changing round the front wheels, the lock nuts (inside) must first be released. Then unscrew the axle bolt with the
corresponding Allen key. Use a 4 mm Allen key for assembling and disassembling the rollers.
Pneumatic tyres
If your micro kickboard is equipped with pneumatic tyres, ensure that the tyres are inflated to 80 psi or 5.6bar.
Three types of spring hardness
Different spring hardness options are available
1. soft (blue) - especially suitable for children and unsure beginners
2. allround (black) - far confident beginners and advanced riders
3. hard (orange) - for Pros who want it faster
17