Whirlpool W10746870A Manual De Uso página 10

3.
Load laundry into washer
Load garments in loose heaps evenly around basket wall.
For best results, do not pack the load tightly. Do not wrap large
items such as sheets around the agitator; load them in loose
piles around the sides of the basket. Try mixing different sized
items to reduce tangling.
000000
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
Add fabric softener to dispenser
(on 27" models)
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer's directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the underside of the rim. See max fill
line arrows. Do not overfill.
Adding Liquid Fabric Softener Manually to Wash Load
On models without a fabric softener dispenser (24" models),
or to add fabric softener manually on dispenser models, during
the final rinse, wait until the washer has completed filling, then
push in the Cycle knob to pause the washer. Lift the lid and add
the measured recommended amount of liquid fabric softener
(diluted with 1/2 to 1 cup [125 to 250
mL]
warm water). Do not
allow liquid fabric softener to spill, splash, drip, or run into the
basket or on load. Do not use more than the recommended
amount. Close the lid and pull out the Cycle knob to start the
washer.
to dispenser (on 27" models)
Turn Cycle knob clockwise to choose your wash cycle.
For more information, see "Cycle Guide."
Do not overfill, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
10