Check Your Vent System
for Good Airflow
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
Good airflow
Along with heat, dryers require good airflow to efficiently
dry laundry. Proper venting will reduce your drying times and
improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role
in good airflow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
f
Maintain good airflow:
[]
Clean your lint screen before each load.
[]
Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
(102 rnrn}
}-
[]
Use the shortest length of vent possible.
[]
Use no more than four 90 ° elbows in a vent system;
each bend and curve reduces airflow.
[]
[]
Bet
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the installation instructions
supplied with your
dryer for final product check.
Clear away items from the front of the dryer.
Use Automatic
cycles for better
fabric
care and energy
savings
Use the Automatic
Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic
Dry
cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the
dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.
With Timed Drying, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
overdrying. Use Timed Drying for the occasional damp load that needs a little more drying time or when using the drying rack.