Technical Specifications; Trademarks And Licenses - M-Audio BX5 Carbon Guia Del Usuario

Appendix (English)

Technical Specifications

Type
LF Driver
HF Driver
Frequency Response
Crossover Frequency
LF Amplifier Power
HF Amplifier Power
Signal-to-Noise Ratio
Input Connectors
Polarity
Input Impedance
Input Sensitivity
Protection
Indicator
Power Requirements
Cabinet
Dimension
(height x width x depth)
Weight
(without packing)
* Specifications are subject to change without notice.

Trademarks and Licenses

All other product or company names are trademarks or registered trademarks of their
respective owners.
2-way near-field studio reference monitors
5-inch (127 mm) Kevlar curved cone with high temperature voice
coil and damped rubber surround. Magnetically shielded
1-inch (25 mm) magnetically shielded natural silk dome
56 Hz – 22 kHz
2.8 kHz
40 W
30 W
100 dB typical A-weighted
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Positive signal at + input produce outward LF cone displacement
20 KΩ balanced, 10 KΩ unbalanced
85 mV pink noise input produces 90 dBA output SPL at 1 meter
with volume control at maximum
RF interference, output current limiting, over temperature, turn-
on/off transient, subsonic filter, external mains fuse.
Power on/off indicator on rear panel
Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or
100 V ~50/60 Hz
Vinyl-laminated high-acoustic-efficiency MDF
9.8" x 6.9" x 7.9"
250 mm x 176 mm x 200 mm
11 lbs.
5.0 kg
23