Control Panel Features - LG DLEX8100 Serie Manual De Propietario

10
INTRODUCINg YOUR DRYER

Control Panel Features

Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for
more detailed information.
wWARNINg
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
Power
Button
Operation
Button
MFL67731082_en_170712.indd 10
Cycle Selector Knob
Start/Pause
POWER ON/OFF BUTTON
y
- Press to turn the dryer ON or OFF. Pressing the POWER button during a cycle
will cancel that cycle and any settings will be lost.
CYCLE SELECTOR kNOB
y
- Turn this knob to select the desired cycle. Once the desired cycle has been
selected, the standard presets will be shown in the display. On MANUAL DRY
cycles, these settings can be adjusted using the cycle setting buttons anytime
before starting the cycle.
START/PAUSE BUTTON
y
- Press this button to START the selected cycle. If the dryer is running, use this
button to PAUSE the cycle without losing the current settings.
NOTE : If you do not press the START/PAUSE button to resume a cycle within
60 minutes, the dryer turns off automatically.
More Time/Less Time TIME BUTTONS
y
- To adjust the drying time, use these buttons with Manual Dry, Time Dry, and
Steam Fresh™ cycles, as well as the Reduce Static and Easy Iron options. Press
the More Time button to increase the selected manual cycle time by a minute;
press Less Time to decrease the cycle time by a minute.
CYCLE SETTING BUTTONS
y
- Use these buttons to adjust the settings for the selected cycle.
OPTION BUTTONS
y
- The OPTION buttons allow you to select additional cycle options. Not all
settings are available for all cycles. Refer to the CYCLE GUIDE section of the
manual.
STEAM FUNCTIONS
y
- LG's steam technology allows you to inject fabrics with a swirling jet of hot
steam to refresh clothes, reduce static, and make ironing easier. Simply select
the Steam Fresh™ cycle, or add a STEAM option to the selected cycles.
LED Display
Dry Level Temp.
Button Button Control
Button
Description
Time Signal
Dry Button
Button
2017.7.12 5:10:45 PM