TC
Interior space-temperature at approx. 25 °C ambient temperature:
Status display
seven illuminating LEDs
Cooling
an illuminating LED
seven illuminating LEDs
Heating
an illuminating LED
➤ If you want to select the temperature to cool/heat, press the button "Temp"
(fig. 2 F, page 4), until the requested temperature range is reached.
6.6
Connect to the cigarette lighter
I
NOTE
When you connect the cooling box to the cigarette lighter of your
vehicle (fig. 3, page 4), observe that you have to turn on the ignition, if
necessary, so that the device is supplied with current.
6.7
Removing the lid
You can remove the lid of the cooler (fig. 5, page 5):
➤ Open the lid until it is at a ca. 30° angle to the cooler.
➤ Pull the lid forwards and lift it off diagonally.
7
Cleaning and servicing
A
NOTICE! Damage hazard
• Never clean the cooler under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
EN
Cleaning and servicing
Temperature range
approx 0 °C in the interior space
approx 16 °C in the interior space
(ECO mode)
approx 65 °C in the interior space
approx 48 °C in the interior space
13