Televes COFDM-PAL NICAM Manual De Instrucciones página 36

User manual
Should a shortcut is detected in the input
connector (preamplifier powering enabled),
the front led of the module will blink until this
state disappears.
If the 24V preamplifier powering is enabled
and there is not connection to the power
supply of the module through the 4-thread
cable, the front led will also blink.
c.- Service menu
The name of the selected service is displa-
yed along with the number of available ser-
vices in the multiplex:
By pressing and buttons you can
change the selected service.
d.- Audio menu
The next menu shows the selected audio
channel (and the number of audio services
available) and the audio mode.
There are two different modes for the selec-
tion of the audio channel: auto (language
search) and manual (index).
In automatic mode you can choose two
favourite languages for the audio. The unit
will search for the audio correspondent to
the first selected language. If it doesn't find
it it will search for the second favourite. If it
can't find any of the favourite languages the
unit will select the first audio service of the
program. In this mode the unit searches for
the selected audio even when this language
is broadcasted in one of the channels of a
dual service.
In manual mode the user selects the audio
channel from the list of available audios for
the present program:
36
COFDM-PAL NICAM
In this mode the user can select the audio
mode. The available modes are: Stereo,
Right, Left.
Stereo The received L and R channels
are modulated
Right Only the R channel is modulated
Left Only the L channel is modulated
To carry out the modification the
must be pressed until the desired parame-
ter flashes. Then the correspondent field can
be modified using the and
NOTA: If the service of audio is dual mono (a
language in the channel L and another
one in channel R), the user it will have
to select the suitable option (Right o
Left). If Stereo is selected will leave
both languages, each one in its
channel.
key
keys.