Norm For Gabinet Mounting - Televes COFDM-PAL NICAM Manual De Instrucciones

User manual
9.- NORMS FOR CABINET MOUNTING
1.- EXTRACTOR for forced ventilation.
Mandatory in the module placed in the
highest position.
2.- Place the modules as low as possible in
the room.
3.- Maximum room temperature (measured
in front of the highest module): 40 ºC.
4.- Room should have ventilation plates at
the bottom of any wall to allow the
entrance of air for ventilation.
1
2
200 mm
200 mm
200 mm
46
COFDM-PAL NICAM
3
4