How To Use The Product - Televes COFDM-PAL NICAM Manual De Instrucciones

User manual

5. - HOW TO USE THE PRODUCT

5.1.- MAIN MENU
When the programmer connector is inserted
in the "PROG" socket of the front pannel the
first information displayed is the program-
mer version.
The description of the module, the reference
and the firmware version of the unit is dis-
played.
a.- Output menu
The first main menu shows the output fre-
quency/channel (depending on the freq.
mode) and the output level.
The output frequency range is 47-862 MHz.
The output level control ranges from 00 to
99.
To change the frequency you must press
the button until is located over the selec-
ted digit. By using and
modify the value of the digit . The following
decimal values are permitted for the output
frequency:
=> .00 MHz
=> .25 MHz
=> .50 MHz
=> .75 MHz
To modify the output channel and the output
level you must press until the cursor is
situated over the desired parameter, the
value can be modified by pressing
35
COFDM-PAL NICAM
To switch between frequency mode and
channel mode see 5.2. EXTENDED MENU.
b.- Input menu
This menu displays the following input para-
meters: input frequency or input channel
you can
(depending on the selected mode), bandwith
selection (7-8 MHz) and preamplifier power
supply (0, 12 or 24V).
To modify a parameter you must press
until the desired parameter flashes on and
off. Then you can change the value using
and
and