Carrera RC Quadrocopter CRC X1 Instrucciones De Montaje página 8

To make the Quadrocopter circle to the left or the right on the spot, move
10
the lever on the left cautiously to the left or the right.
To fly the Quadrocopter to the left or the right, push the lever on the right
11
cautiously to the left or the right.
To fly the Quadrocopter forwards or backwards, push the lever on the
12
right cautiously forwards or backwards.
Looping function
WARNING! ONLY FOR EXPERIENCED PILOTS!
If you press the "Looping Button", then an acoustic signal sounds 5x
13a
times. As long as the acoustic signal sounds, slide the right-hand joystick
up, down, to the right or to the left. The Quadrocopter then carries out the loop
or roll in the respective direction. Before you do this, make sure you have
ample room on all sides (about 2.5 m – 8').
Beginner/Advanced switch
WARNING! 100 % IS ONLY FOR EXPERIENCED PILOTS!
30% = beginner mode
13b
Signal sounds once on switching over.
60% = medium mode
The quadrocopter reacts more sensitively than in 30 % mode. Signal
sounds twice on switching over.
100% = Advanced Modus -> 3D Modus
The Quadrocopter reacts very sensitively to joystick movements. Signal
sounds three times on switching over.
Headless Mode
The headless mode helps beginners learn how to fly. Regardless of which
13c
direction the Quadrocopter is rotated, the flight direction always corre-
sponds exactly to the flight direction implemented on the controller. Therefore
a beginner no longer has to steer mirror-imaged when he flies e.g. to himself.
If you press the "Headless Mode Button"
as long as you are in the Headless mode. To deactivate the Headless mode,
press the button renewed.
Automatic control of altitude
The Quadrocopter will maintain the current flying altitude automatically as
14
soon as you release the left-hand joystick during the flight. The right-hand
joystick can be used to fly forwards/backwards and left/right at the same
height. The left-hand joystick is used to circle on the spot with a left/right-hand
movement.
Auto-Start & Fly to ≈1 m
Press the 'Auto-start & fly to ≈1 m' button on the controller, in order to start
15
the motors and automatically fly up to the altitude of about 1 m . You are
able to influence the direction of flight at any time during the starting operation
by means of moving the right joystick. The Quadrocopter will maintain itself in
position automatically as soon as the altitude of about 1 m has been reached.
The flying height can be changed manually at any time by moving the left-
hand joystick forwards (increase height) or backwards (reduce height).
Auto Landing
You can trigger the automatic landing function at any time by means of pres-
16
sing the 'Auto landing' button. The speed of the rotors will reduce gradually
as a result. You are able to influence the landing position at any time during the
landing procedure by means of moving the right-hand joystick. The motor will
switch itself off as soon as the Quadrocopter is on the ground.
Trimming the Quadrocopter
Auto-trimming
17
1. Place the Quadrocopter on a horizontal surface.
2. Link the Quadrocopter with the controller as described in "Link-
ing the model with the controller".
3. Slide the gas lever and the lever for forward / back simultaneously
into the right lower corner. The LED on the Quadrocopter flashes
on briefly and then lights up continuously. The signalling tone will
sound once.
4. The neutral setting is completed.
When hovering, if the Quadrocopter flies to the left or right without you
18
moving the lever for left / right movement, please proceed as follows:
If the Quadrocopter moves on its own fast or slow sideways to the left,
ENGLISH
10
, an acoustic signal sounds for
press the lower right trimmer for right / left tilt in steps to the right. If the
Quadrocopter moves right, press the trimmer for right / left tilt in steps to
the left.
When hovering, if the Quadrocopter flies forwards or backwards without
19
you moving the lever for forwards or backwards movement, please pro-
ceed as follows:
If the Quadrocopter moves on its own fast or slow forwards, press the
upper right trimmer for forwards / backwards in steps downwards. If
the Quadrocopter moves backwards, press the trimmer for forwards /
backwards in steps upwards.
Return aid
Make sure there are no obstructions in the flight path and that there is
20
no wind! WARNING: the model is NOT equipped with a GPS system!
As long as this button is pressed, the quadrocopter returns back in the direc-
tion of the pilot, regardless of how it is positioned.
WARNING! Only functions if the quadrocopter is in front of the pilot.
Changing the rotor blades
Use a smooth narrow object to help draw off a rotor blade if necessary.
21
Make sure that you draw the rotor blade with great care vertically up-
wards, and hold the motor from below to stabilise it.
QR code for motor-change system, spare parts and further informa-
22
tion.
WARNING!
23
Be sure to note the marking and colour, also the tilt angle of the rotor
blades!
Front left: red – marking "B"
Front right: red – marking "A"
Rear right: black – marking "B"
Rear left: black – marking "A"
Troubleshooting
Problem: Remote control does not work.
Cause:
The ON/OFF-power switch is turned "OFF".
Solution: Turn the ON/OFF-power switch "ON".
Cause: The batteries have been wrongly inserted.
Solution: Check if the batteries have been correctly inserted.
Cause: The batteries do not have enough power.
Solution: Insert new batteries.
Problem: The Quadrocopter cannot be controlled with the remote control
Cause: The power switch on the remote control is turned "OFF".
Solution: First turn the power switch on the remote control "ON".
Cause: The remote control is possibly not correctly frequency bound with
the receiver on the Quadrocopter.
Solution: Please carry out the binding procedure as described in "Checklist
for flight preparation".
Problem: The Quadrocopter does not lift.
Cause: The rotor blades rotate too slowly.
Solution: Slide the gas lever up.
Cause: The battery´s power is not sufficient.
Solution: Charge the battery (see chapter "Charging the battery").
Problem: During flight, the Quadrocopter loses speed and height without any
obvious reason.
Cause: The battery is too weak.
Solution: Charge the battery (see chapter "Charging the battery").
Problem: The quadrocopter only flies in a circle or turns over on starting.
Cause:
Rotor blades incorrectly fitted or damaged.
Solution: Fit rotor blades / replace rotor blades as described in
Errors and changes excepted
Colours / final design – changes excepted
Technical changes and design-related changes excepted
Pictograms = symbolic photos
8
21 22 23
.