AMBROGIO BASIC Manual De Uso página 45

GENERAL INFORMATION .............................. 4
TECHNICAL INFORMATION .......................... 5
SAFETY INFORMATION .................................. 8
INSTALLATION ................................................ 10
ADJUSTMENTS .............................................. 21
A
Adjustments, recommendations for, 21
Appliance and manufacturer, identification, 4
Arrangement and marking of the working area, 12
Assistance request, mode, 5
Assistance, request mode, 5
B
Batteries replacement, 40
Battery connection, installation, 18
Battery installation and connection, 18
Battery recharge, 30
Blade installation, 21
Blade, replacements, 43
C
Chain tension adjustment, 21
Cutting height setting, 31
D
Drive chains lubrication, 36
E
Equipment installation planning, 10
Equipment, general description, 5
G
General description of the equipment, 5
I
Identification of manufacturer and appliance, 4
Installation, planning installation, 10
M
Maintenance, recommendations for, 34
Manual start and stop of the robot, 26
Manual, purpose of, 4
Manufacturer and appliance, identification, 4
P
Packaging and unpacking, 10
Parts replacement, recommendations for, 40
Perimeter wire installation, 15
Power supply-transmitter unit installation, 17
Procedure to request technical assistance, 5
Programmed maintenance intervals chart, 35
Prolonged inactivity and service restart, 34
Purpose of the manual, 4
R
Recommendations for adjustments, 21
Recommendations for maintenance, 34
Reproduction, even partial, of this document without written permission by the manufacturer is forbidden. The manufacturer assumes a policy of continual improvement and reserves the right to modify this do-
cument without prior notice on condition that modifications do not constitute safety risks.
© 2002 - Text, illustrations and page setting by: IDM experts in technical communications - Forlì - Texts may be partially or totally reproduced if the author is cited.
CONTENTS
USE AND FUNCTIONING ............................ 23
ORDINARY MAINTENANCE ...................... 34
FAILURES, CAUSES AND SOLUTIONS .. 37
PARTS REPLACEMENTS ............................ 40
ANALYTICAL CONTENTS
Recommendations for part replacement, 40
Recommendations for use, 23 , 34
Remote control description, 25
Remote control programming procedure, 29
Replace the blade, 43
Robot (from one area to another), manual transfer, 29
Robot automatic stop, 28
Robot cleaning, 35
Robot controls description, 23
Robot disposal, 43
Robot manual stop, and start, 26
Robot manual transfer (from one area to another), 29
Robot safety stop, 27
Robot start without perimeter wire, 27
Robot transfer by remote control (from one area to
another), 29
Robot without perimeter wire, start, 27
S
Safety for man and the environment during disposal, 9
Safety rules, 8
Safety signals, 9
Specifications, 7
T
Troubleshooting, 37
U
Unpackaging and packing, 10
Use, recommendations for, 23 , 34
W
Working area, arrangement and marking, 12
- 3 -
GB
User's manual