AMBROGIO BASIC Manual De Uso página 73

CUTTING HEIGHT SETTING
Before setting the cutting height
of the blade, make sure that the
robot has stopped in safety condi-
tions (see "Robot safety stop")
1-Place the robot on a flat base
surface.
2-Undo the knobs (A).
3-Remove the hood (B).
4-Undo the screws (C) and re-
move the body cover (D) on
both sides.
5-Detect from the measuring
scale (H) the height value of
the set trimming.
6-Insert a shim under the chas-
sis (F) of the robot (see figure)
so to increase or decrease the
cutting height value compared
to the one detected on the
measuring scale (H).
knob (A)
measuring scale (H)
chassis
(F)
- 31 -
hood (B)
IDM - 41501602100.tif
screw (C)
guard (D)
IDM - 41501602800.tif
IDM - 41501603500.tif
User's manual
GB