Inflating Tubeless Tyres(T.i. Versions Only); Trouble Shooting - Corghi A 2030 Manual De Uso

WARNING
Before carrying out the operations described below, always make sure that there is
no dirt, dust or other impurities on the jaws near the air outlet holes.
- Make sure that the wheel is secured to the table top with inside clamping.
- Connect the Doyfe inflator chuck (21) on the air hose to the valve stem.
- Hold the tyre with your hands and lift it until there is a slight gap between the lower
bead and bottom edge of the rim in order to close the upper bead and the top of the
rim.
- Press the inflation pedal fully down for a short period to the bead seating position
(fig.22b). The tyre will expand and the beads will seat.
- Continue to press the pedal in the inflation position (fig.22b) until the beads are com-
pletely sealed.
Note: to improve the operation of the tubeless tyre inflation system the compressed
air line pressure must be between 8/10 bar.
Power cord conductor shorting to ground.
➔ Check the wiring.
Motor shorted.
➔ Renew the fuses (A 2020 DV, A 2025 DV, A 2030 DV, A 2015 DV).
➔ Renew the motor.
Rotation control pedal fails to return to the central position
Control spring broken.
➔ Renew the spring.
Bead breaker pedal and table top pedal
Control spring broken.
➔ Renew the spring.
No oil in lubricator.
➔ Top up lubricator with SAE20 non-detergent oil.
Air leak from bead breaker cock.
➔ Renew the cock.
➔ Renew bead breaker cylinder.
50
Inflating tubeless tyres
(T.I. versions only)

TROUBLE SHOOTING

Table top will not rotate.
do not return to home position
Air leak inside the machine
A 2030 - A 2025 - A 2020 - A 2015 - A 2005 operator's manual