Corghi A 2030 Manual De Uso página 44

9 Clamp (6) control pedal (3-position pedal for opening and closing rim clamps).
10 Bead breaker pedal (2-position pedal to operate the bead breaker (13).
11 Table top (7) pedal (3-position pedal)
• position 0: table top stationary
• depressed (held with foot): clockwise rotation at speed proportional to pedal
pressure.
• raised (held with foot): single speed counter-clockwise rotation.
12 Inflation pedal (two-position pedal in the A 2020 - A 2025 - A 2030 STD and three-posi-
tion in the T.I. version, for inflation of tyre with Doyfe inflator chuck (21)) (not present
in A 2015 STD and A 2005).
13 Bead breaker shoe (mobile shoe to detach bead from rim).
14 Valve release button (button for manual release of excess air from tyre) (not present
in A 2015 STD and A 2005).
15 Pressure gauge (for tyre pressure readings) (not present in A 2015 STD and A 2005).
16 Rim support (in the A 2020 - A 2025 - A 2030 the rim support retracts to aid bead
breaking on Racing wheels).
17 Safety relief valve (max. pressure 12 bar) (T.I. versions only).
18 LFilter/lubricator and pressure regulator (regulates pressure, removes water, lubricates
and filters the compressed air supply).
19 Lube bottle.
20 Bead lifting tool (raises and positions the tyre bead on the mount/demount head).
21 Doyfe inflator chuck (clips on to the tyre valve for inflation).
22 Inflation nozzles (air blast from nozzles expands tyre sidewalls to seal beads and
allow inflation) (T.I. versions only).
23 Air tank (T.I. versions only).
24 Lever (for locking the vertical side arm and the swing arm).
WARNING
For technical characteristics, attention notices, maintenance and all other information
regarding the air tank, refer to the air tank user and maintenance manual supplied
with the machine documentation.
44 A 2030 - A 2025 - A 2020 - A 2015 - A 2005 operator's manual