Proline KM10 Manual De Instrucciones página 6

Mixer Assembly
1. Press the head release lever to lift the head unit.
3. Place the splash guard onto the required accessory
(beater, whisk or dough hook). The splash guard will
fix into the two notches on either side of the screw
head.
5. Press the head release lever and lower the head
unit.
Blender Assembly
To assemble the blender onto the appliance, remove
the cover for blender attachment opening.
Fit the blender onto the opening by turning it
anticlockwise until it locks in place.
2. Place the mixing bowl into the recessed bowl
locator. Twist the mixing bowl anticlockwise to
lock it into place.
4. Place the accessory with splash guard into the
attachment socket. Rotate the accessory screw
head clockwise to secure into place.
6. To prevent ingredients from splashing out
during whisking, it is recommended to attach
the bowl cover to the mixing bowl.
5