Warning: When speed changes from 5 to 6 or when the device starts working, the device could
emit some noise. This is completely normal and does not affect the device's operation.
•
To crush or chop hard or large quantities of food, select speed 5 at first and then switch it
to 10 to ensure perfect performance.
TEMPERATURE
•
During standby mode or operation, press this button to enter temperature-setting mode.
The temperature icon will flash on the display.
•
Turn the knob left to decrease the temperature and right to increase it, from 37 ºC to 120 ºC.
•
If the temperature icon is red and you want to operate the machine at a high speed, reduce
the food quantity to below 1.5 L.
HEATING POWER
•
During standby mode or operation, press this button to enter heat-power setting mode.
The heat power icon will flash on the display.
•
Turn the knob left to decrease heat power and right to increase it, from level 1 to 10.
•
Low heat power is suggested to cook fatty foods to avoid it from burning and small
quantities of food, as both require precise temperature and control
•
High heating power will cook food much faster.
•
The heat power function will not activate unless the temperature is set too. It is suggested
to use the default setting for each temperature level.
TURBO
•
During standby mode, press this button for the appliance to operate at maximum speed.
The display will show
•
Stop pressing the button for the appliance to stop operating under this function. The
machine will stop automatically.
•
This function can only operate for 1 minute maximum each time.
Warning: When the TURBO function is activated, the device could emit some noise. This is
completely normal and does not affect the device's operation.
FUNCTIONS
1.
Chop: chops vegetables and meat to the desired size.
2.
Mince: minces vegetables, herbs, meat, garlic and nuts in just a few seconds. It even
crushes ice for you to prepare cocktails and smoothies.
3.
Grind: prepare milkshakes, sauces, dips, creams and purées with smooth and silky texture.
4.
Mill: the food processor allows milling an endless number of foodstuffs and allows
flashing.
ENGLISH
29