Function - Vortice VORT-KRYO POLAR Manual De Instrucciones

ENGLISH
Insert the filter into the frame (fig.14)
14 14
Fit the filter and reassemble the fastening device (fig.15)
15 15
Refit the filter holder to the appliance

Function

Control panel (fig.16)
16 16
9
3
23
22
21
8
20
19
18
7
17 16 15 14
16
10
2
3
11
13
Buttons
1 On/off
2 Timer
3 "Night time" function
4 Temperature "UP"
5 Temperature "DOWN"
7 Operation mode
8 Fan speeds
Indicators
9 Power Supply
10 Timer
11 "Night" function
13 Display
14 Slot for receiving signal from remote control unit
15 Fan mode
16 Dry mode
17 Cooling mode
18 Automatic mode
19 Minimum speed
20 Medium speed
21 High speed
22 Condensation tank full
23 Compressor on
Functions
Switching On/Off
Press ON/OFF: the appliance comes on in Cooling
Mode at minimum speed; the preset temperature is
24°C
All the indicator lights come on at the same time; the
display shows ambient temperature from 0°C to 50°C
to turn the appliance off, press the ON/OFF button.
Setting operating mode
Press the MODE button to select the required operating
mode: Fan, Dry, Cooling, Auto. The indicator light for the
mode selected will come on.
If the room temperature drops below the set limit, the
Cooling Mode automatically cuts out and the appliance
continues to operate in Fan Mode at the preset speed.
If room temperature rises to above the preset limit, the
appliance automatically goes back to Cooling Mode.
4
Setting the temperature
Use the Temperature "UP" and Temperature "DOWN"
5 buttons to set the required temperature.
While the temperature is being set, the display shows
the reading. When a temperature has been set, the
display will return to showing room temperature.
The appliance preset temperature is 24°C
Setting fan speed
Press SPEED to select the required fan speed setting:
Minimum, Medium, Maximum. The indicator light for the
mode selected will come on at the same time.