Unpacking The Appliance; Overview Of The Components / Scope Of Delivery; Notes For Use; Button Functions - Profi Cook PC-KA 1169 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
• It is intended for domestic use and similar areas of use such as e.g.:
- In staff kitchens in shops, offices and other commercial areas;
- By guests in hotels, motels and other accommodation facilities.
It is not intended for use in farm accommodation or Bed & Break-
fast establishments.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic films, filler
material, cable ties and cardboard packaging.
3. Sensitive surfaces are possibly protected with foil.
Remove these foils.
4. Check the content for any missing parts.
5. In the event that the packaging content should be incom-
plete or if damages are noticeable, do not operate the
appliance. Return it to the dealer immediately.
NOTE:
There may be dust and production residue on the
appliance. We recommend cleaning the appliance as
described under "Cleaning".
Overview of the Components /
Scope of Delivery
1 Filter holder
2 Water tank lid
3 Tab to open the water tank lid
4 Water tank
5 Glass jug with lid
6 Warming plate
7 Water level indicator
8 Function buttons
HOUR
Hour
MIN
Minute
ON / OFF Turn appliance on and off
PROG
Set current time
Program TIMER operation
MODE
Adjusting aromatic strength
9 Display

Notes for Use

Placement
• Place the automatic coffee maker on a stable and level
surface. Place the appliance in such way that it cannot
tip over.
• Do not place the appliance in close proximity to a gas or
electric stove or any other heat source.
PC-KA1169_IM
Note About the Brewing Process
During the brewing process and depending on the degree of
grinding and the used amount, the coffee powder absorbs
a certain amount of water. That is why the quantity of coffee
might diverge from the quantity of water in the water tank.
European Regulations on Energy Saving
NOTE:
The European Directive 2009 / 125 / EC (Ecodesign Direc-
tive) incorporates measurements for energy saving.
The following applies to coffee makers: The keep-warm
period is limited to max. 40 minutes after which the appli-
ance turns off automatically.
You benefit from better safety and lower energy con-
sumption.
Electric Connection
1. Ensure that your mains power corresponds with the
specifications of the appliance. The specifications are
printed on the type label.
2. Connect the mains cable to a properly installed and
earthed wall outlet. The appliance is in standby mode.
The time on the display is signalizing that the appliance
is on stand by mode.
Initial Operation
Before making coffee for the first time operate the appliance
twice with clean water only and without paper filter. This
removes dust, which may have collected during transport.
Follow the instructions given under "Switching on the Coffee
Machine Directly".

Button Functions

ON / OFF
Pressing once:
Turn on the device, immediate brewing
process (The indicator light shines red.)
Pressing twice:
TIMER mode, brewing process will start
at the programmed time (The indicator
light shines blue.)
Pressing 3 times: Turning off device. (The control lamp
goes out.)
PROG
Pressing once:
Setting of the current time;
39
15.10.18

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido