Operation - Profi Cook PC-KA 1169 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Pressing twice:
Adjusting the timer; query of the adjusted
start time.
HOUR
Hour
MIN
Minute
MODE
Adjusting aromatic strength

Operation

Set the Time
The device works in the 24-hour mode. The time "12:00" is
preset.
Press the PROG button one time. "CLOCK" will appear
above the time in the display.
• Set hours:
Press the HOUR button.
• Set minutes:
Press the MIN button.
• Leaving the setting mode:
Wait ca. 5 seconds after the last push of a button.
"CLOCK" in the display goes out.
Preparing the Coffee Machine
1. Open the lid of the water tank.
2. Fill cold water according to the desired amount of cups
of coffee into the rear water tank. The water level is
displayed on the indicator.
NOTE:
You can use the jug to fill the water tank.
CAUTION:
Do not overfill the tank! Do not fill it above the "max"
mark.
3. Ensure that the filter holder is properly attached.
4. Turn over the lower fold of the paper filter (size 1 x 4) and
place it in the filter funnel. Then fill it with coffee powder.
NOTE:
Do not put too much coffee powder into the filter to
avoid spillage.
5. Now close the lid of the water tank. It must snap into
place.
6. Place the jug onto the warming plate.
CAUTION: Drip stop
Your appliance comes with a drip stop. It closes when
removing the coffee jug. This prevents the coffee from
dripping onto the warming plate if there is still water in
the filter.
• Ensure that the lid is attached to the coffee jug. It
opens the drip stop.
40
PC-KA1169_IM
= mild
= medium
= strong
CAUTION: Drip stop
• If there is still water in the tank, place the jug un-
derneath as soon as possible. Otherwise the filter
might overflow.
Selection of Aroma Strength
Filter coffee develops more aroma if it swells prior to brew-
ing. This means: The longer the swelling time, the stronger
the aroma.
The appliance allows you to choose from three different
aroma strengths: mild, medium and strong. Swelling time
is increased or decreased in accordance with the brewing
procedure.
• Press the MODE button once. "
time, in the display.
• Increase aroma strength by pressing the MODE button
several times.
• Leaving the setting mode:
Wait ca. 5 seconds after the last push of a button. The
aroma strength notification in the display will go out.
NOTE:
The adjusted aroma strength will be saved for future
brewing operations.
Switching on the Coffee Machine Directly
Please follow the instructions under points "Preparing the
Coffee Machine".
7. Press the ON / OFF button once. The appliance com-
mences operation immediately using the previously
selected aroma strength. The indicator light shines red.
NOTE:
• The unit switches off automatically about 40 min-
utes after the brewing. The control lamp goes out.
The appliance is once again in standby mode.
• If you yourself would like to shut off the device
beforehand, press the ON / OFF button twice.
Automatic Operation
Please follow the instructions under points "Preparing the
Coffee Machine".
7. Press the PROG button twice. "TIMER" will appear
above the time in the display.
8. Set start time:
- Set hours:
Press the HOUR button.
- Set minutes:
Press the MIN button.
- Leaving the setting mode:
Wait ca. 5 seconds after the last push of a button.
"TIMER" in the display goes out.
" appears above the
15.10.18

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido