Unpacking The Appliance; Overview Of The Components / Delivery Scope; Application - Profi Cook PC-SM 1078 Instrucciones De Servicio

Unpacking the appliance

1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.

NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under "Cleaning".
Overview of the Components /
Delivery scope
1 Lid (2x)
2 Sealing ring for lid (2x)
3 Bottle (2x)
4 Sealing ring for knife block
5 Knife block
6 Base section with motor
7 button
8 Cable storage

Application

Follow our text and the pictures on page 3 and see
how a smoothie can be made quickly from fresh
ingredients.
Location
Set the appliance onto a solid, level surface.
Mains cable
Unwind the mains cable completely from the
bottom of the appliance. Guide the mains cable
through the recesses on the bottom of the appli-
ance.
Preparation of the appliance

NOTE:
• Check the sealing rings in the knife block and
lid for correct installation.
• Because of the risk of burning, do not fill with
liquids at a temperature of above 50°C.
38

NOTE:
• Do not fill the bottle above the 600 ml mark.
• If the ingredients produce a lot of froth, do not
overfill the bottle. Reduce the quantity accord-
ingly.
1. Fill your ingredients into the bottle and tighten
the knife block by hand (Fig. A).
2. Turn the bottle round and place it with the knife
block onto the base unit. Press down the bottle
and turn to tighten. Note the markings on the
appliance (Fig. B).
Electrical Connection
• Check that the mains voltage is correct before
you connect the plug to the socket. The specifi-
cations of the appliance are shown on the type
label.
• Only connect the appliance to a tested socket.
Operation
Did you connect the plug? Next, press the button
.
• You can press intermittently or until all ingredi-
ents have been mixed.

NOTE: Short-time operation
Do not let the motor run for longer than 60 sec-
onds and then pause for 60 seconds.

NOTE: Safety switch
Operation is prevented if the knife block or the
bottle is not fitted correctly.
End of operation
Has your smoothie been mixed well?
• Then release the button and pull the plug
from the socket.
• Remove the knife block with the bottle from the
base unit and turn the bottle round.
• Now replace the knife block through the lid
(Fig. C).