Samsung RF28HMEDBSR/AA-00 Manual Del Usuario página 12

5. Remove the screw ( 8)attached tothe
lower left a nd right door h inges with aphilips
screwdriver (+). Remove the 2hex head b olts
(9)attached tothe lower left a nd right door
hinges with an allen w rench (3/16"). Remove
the lower left a nd right door h inges (10 ).
RE-ATTACHING TH E
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
Type A Type B
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) w/harness with a flat-
blade screwdriver (-).
3. Press the locking tab and separate the Wire
Connector.
,_ CAUTION
When reassembling it, be sure to connect the wire
harness.
If it is not connected, the Flex Room does not
work.
Engl sh - 12