Depth Adjustment - DeWalt DWFP12658 Manual De Instrucciones

cap when working in restricted areas. Sudden recoil
can result in impact to the body, especially when
nailing into hard or dense material. (Fig. S)
• Grip tool firmly to maintain control while allowing
tool to recoil away from work surface as fastener is
driven. In bump action mode (contact actuation mode)
If contact trip is allowed to recontact work surface
before trigger is released an unwanted fastener will
be driven.
• Choice of triggering method is important. Check the
manual for triggering options.
BUMP OR CONTACT ACTUATION TRIGGER MODE
• When using the bump action trigger mode, be
careful of unin tentional double fires resulting from
tool recoil. Unwanted fasteners may be driven if the
contact trip is allowed to accidentally re-contact
the work surface. (Fig. T)
TO AVOID DOUBLE FIRES:
• Do not engage the tool against the work surface
with a strong force.
• Allow the tool to recoil fully after each actuation.
• Use sequential action trigger mode.
• When bump actuating the nailer, always keep tool in
control. Inaccurate placement of tool can result in
misdirected discharge of a fastener.
SEQUENTIAL ACTION TRIGGER MODE
• When using the sequential action trigger mode, do
not actuate the tool unless the tool is placed firmly
against the workpiece.
• DEPTH ADJUSTMENT: To reduce risk of serious injury
from accidental actuation when attempting to adjust
depth, ALWAYS:
• Disconnect air supply.
• Engage trigger lock
• Avoid contact with trigger during adjustments.
• Do not drive nails blindly into walls, floors or other
work areas. Fasteners driven into live electrical wires,
plumbing, or other types of obstructions can result in
injury. (Fig. U)
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use tool
while tired or under the influence of drugs or alcohol.
A moment of inattention while operating power tools may
result in serious personal injury.
WARNING: Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains
chemicals known to the Sate of Califomia to cause cancer,
birth defects or other reproductive harm. Some examples of
these chemicals are:
5 - ENG
Fig. P
Fig. Q
Fig. R
Fig. S
Fig. T
FIG. U