CLEANING
THE DOOR SEAL/BELLOW
1. Open the washer door and remove any clothing or items from the washer.
2. Check if there are any foreign substances on the grey seal/
bellows (9 between the lid and the drum.
To check this, turn the seal/bellows @ out.
3. If there are any foreign substances, remove them.
4. If you find stained areas, wipe them down using the procedure below:
a} Carefully combine s4 cup (177 mL) of liquid chlorine bleach with 1 gal. (3.8 L) of warm
tap water.
b} Wipe the seal/bellow area with the dilute solution using a damp cloth.
c} Let stand 5 minutes.
d} Wipe down the area thoroughly with a dry cloth and let the washer interior air dry with
the door open.
IMPORTANT:
,,
Wear rubber gloves when cleaning for prolonged periods.
,,
Refer to the bleach manufacturer's instructions for proper use.
PRESERVING
THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washing machine. They can scratch or
damage its top cover. Keep them in the pedestal (if purchased) or in a separate storage box.
Since the entire washing machine has a high-gloss finish, the surface can be scratched or damaged.
Avoid scratching or damaging the surface when using the washing machine.
maintainng
your washer 31
WF395BTPA 03145B 06 ENindd
31
2014-2 24 11:52:45