maintaining your washer
CLEANING THE DOOR SEAL/BELLOW
1. Open the washer door and remove any clothing or items from the washer.
2. Check if there is a foreign substance on the grey seal/
bellows between the lid and the drum.
To check this, turn the seal/bellows out.
3. If there is a foreign substance, remove it.
4. If you find stained areas, wipe them down using the procedure below:
a) Carefully combine ¾ cup (177 mL) of liquid chlorine bleach with 1 gal. (3.8 L) of warm
tap water.
b) Wipe the seal/bellow area with the dilute solution using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down the area thoroughly with a dry cloth and let the washer interior air dry with
the door open.
IMPORTANT:
•
Wear rubber gloves when cleaning for prolonged periods.
•
Refer to the bleach manufacturer's instructions for proper use.
PRESERVING THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washing machine. They can scratch or
damage the top cover of the washing machine. Keep them on the pedestal (if purchased) or in a separate
storage box.
Since the entire washing machine has a high-gloss finish, the surface can be scratched or damaged.
Avoid scratching or damaging the surface when using the washing machine.
26_ maintaining your washer
WF431ABP-03016A-07_EN_v1.indd Sec4:26
WF431ABP-03016A-07_EN_v1.indd Sec4:26
seal/bellow
2012-05-09
2012-05-09
2:17:26
2:17:26