HumanTechnik lisa RF TV-Link Instrucciones De Servicio página 9

Congratulations on purchasing your
lisa RF TV-Link . We hope it will pro-
vide you with many years of service.
You have chosen a modern and reli-
able system.
Please read the operating instruc-
tions through carefully to be able to
start the unit correctly and to fami-
liarise yourself with all of the
systems features.
Standard package
Please make sure that all the follow-
ing parts have been included in the
package:
- lisa RF TV-Link
- 230 V mains power cord
- TV connection cord set
- Operating instructions
- Guarantee card
If any parts are missing please
immediately contact your dealer or
the manufacturer directly.
How it works
The lisa RF TV-Link picks up signals
from different lisa transmitters, con-
verts them into the corresponding
sound, which is then transmitted to
the TV hearing-aid system connec-
ted, e.g. from the Infra Light series.
6 signal lamps (LEDs) also visually
indicate the different transmission
signals.
Display and operating
elements/signal lamps
Signal lamps
The 6 signal lamps (LEDs) visually
indicate which lisa signal has
been sent. The display switches
off after 40 seconds.
lisa -channel selector
Use this switch to select the lisa
RF TV-Link radio channel.
Mono/stereo switch
If the lisa RF TV-Link is operated
on a mono sound source, this
switch must be set to Mono.
Installation
1. Setting the correct radio
channel
A special digital transmission pro-
cess ensures that the radio signals
are picked up without errors. This
process also makes it possible to
set 10 different radio channels.
When supplied from the factory,
all lisa units are set to channel 0.
It is only necessary to set units to
other radio channels if there are
several systems being operated at
the same time in the same buil-
ding.
english 9