Time Setting - Elnur Gabarron ECOMBI PLUS Serie Instrucciones De Uso

2.3.2. Time setting

To check the time setting, press
displayed.
If time setting is wrong, keep pressed
- Hours start blinking first. Use
- Minutes start blinking. Use
- Lastly, day of the week start blinking at the top of the display in numeric format (1=Monday, 2=Tuesday, etc). Use
buttons to set the day of the week and confirm with
button can be pressed at any time to exit the setting time menu.
It is possible to access the time setting menu from the general settings menu (Section 2.3).
i
If the device is associated with a G-Control Hub, the adjustment of time is removed and the time in the G-Control Hub is configured in
the heater automatically.
i
ECOMBI PLUS does not change automatically from summer time to winter time or vice versa when not connected to the internet.
Depending on the tariff it may be necessary to change the clock settings to fit these two timings.
with the backlight on in any operation mode. The time and day of the week set in the unit are
button for 5 seconds when the time and day of the week is displayed to modify it.
and buttons to set the hour. Press
and button to set the minutes and confirm with
23
to confirm.
.
.
and