Operate The Producer Iii Autoloader; Powering On The Producer Iii Autoloader; Pausing The Producer Iii Autoloader - Rimage Producer 7100 Manual Del Usuario

Rimage Producer 7100™ and Producer 8100™ User Guide

Operate the Producer III autoloader

This section provides the information that you need to produce CDs or DVDs with the Producer III
autoloader.

Powering on the Producer III autoloader

Before you begin:
The carousel must be installed before you power on the system. For more information about
installing the carousel, refer to Installing the carousel on page 7.
Important! You must power on the Producer
III autoloader before you power on the Control
Center.
To power on the
autoloader
switch on the rear of the autoloader.

Pausing the Producer III autoloader

You can pause the Producer III autoloader to add discs to the autoloader or change print ribbons.
1. To pause the autoloader, open the front door.
2. To resume operation, close the front door.
6
, press the power Power Switch
110867_A