User Safety; Warning Labels - DeWalt DW089LR Manual De Instrucciones

Contents
EN
• Safety
• Product Overview
• Batteries and Power
• Operation
• Accuracy Check and Calibration
• Specifications

User Safety

Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
If you have any questions or comments about this or any dewalt tool,
call 1-800-4-DeWALT (1-800-433-9258) or go to www.2helpU.com
on the Internet.
WARNING:
Read and understand all instructions. Failure to follow
the warnings and instructions may result in electric shock,
fire and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do not disassemble or
modify the laser level. There are no user serviceable
parts inside. Serious eye injury could result.
6
WARNING:
Hazardous Radiation. Use of controls or
adjustments or performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
The label on your tool may include the following symbols.
V volts
mW milliwatts
laser warning symbol
nm wavelength in nanometers
2 Class 2 Laser

Warning Labels

For your convenience and safety, the following labels are on your laser.
WARNING: To reduce the risk of injury, user must
read instruction manual.
WARNING: LASER RADIATION. DO NOT STARE
INTO BEAM. Class 2 Laser Product
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
Laser Artwork
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
Visual Result
5002595
≤1.5mW @ 510-530nm
• Do not operate the laser in explosive atmospheres, such as
IEC 60825-1: 2014
in the presence of flammable liquids, gases, or dust. Power
Laser Artwork
tools create sparks which may ignite the dust or fumes.
• Use the laser only with the specifically designated
batteries. Use of any other batteries may create a risk of fire.
5002595
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
• Store idle laser out of reach of children and other untrained
Visual Result
persons. Lasers are dangerous in the hands of untrained users.
• Do not use tool if switch does not turn it on or off. Any tool that
cannot be controlled with the switch is dangerous and must be
repaired.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
Laser Artwork
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
Visual Result
5002595
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
Laser Artwork
5002595
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
Visual Result