Product Overview - DeWalt DW089LR Manual De Instrucciones

• Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into the
laser beam. Serious eye injury could result.
• Do not position the laser near a reflective surface which
may reflect the laser beam toward anyone's eyes. Serious
eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may
result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow children
to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed user or others may inadvertently expose themselves
to radiation.
• Position the laser securely on a level surface. Damage to the
laser or serious injury could result if the laser falls
Laser Information
The DW089LR, DW089LG 3-Beam 360° Line Laser and the
DW0811LR, DW0811LG 2-Beam 360° Line Laser are Class 2 laser
products. The lasers are self-leveling laser tools that can be used for
horizontal (level) and vertical (plumb) alignment projects.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser
Notice 50, dated June 24, 2007.
Conforms to UL STDS 61010-1 & 2595
Certified to CSA STD C22.2 No. 61010-1
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire and/
or serious personal injury.
Work Area
• Keep your work area clean and well lit. Cluttered benches and dark
areas invite accidents.
• Do not operate laser tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a laser tool.
Distractions can cause you to lose control.
Electrical Safety
• Use battery operated tool only with the specifically
designed batteries. Use of any other batteries may create a
risk of fire.

Product Overview

WARNING:
Never modify the tool or any part of it. Damage to the laser
or personal injury could result.
Figure 2 -
Battery Interface
Figure 1A -
Pendulum Lock
Figure 1B -
C
Keypad
Figure 1B -
ON/OFF button: horizontal laser line
Figure 1B -
ON/OFF button: side laser line
Figure 1B -
ON/OFF button: front vertical laser line (DCE089R/G
F
only)
Figure 2 -
Magnetic pivot bracket
Figure 4 -
Tripod thread fitting (1/4 - 20 & 5/8 -11)
Figure 1B -
Battery level indicator
Figure 5 -
Ceiling Mount Clamp
Figure 5 -
L
Ceiling Mount
Figure 5 -
M
Screw Hole
A
B
D
E
G
I
J
K
EN
7