Before Use; Safety Instructions - JB Systems Light LED PIPE RGB 230V Manual De Instrucciones

ENGLISH
®
Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.
®
A complete JB Systems LED PIPE 230V system contains the following components:
 1 or more LED PIPE tubes (can work standalone or can be connected to the LED PIPE controller)
 1 optional LED PIPE controller (controls the connected led tubes)
 Optional signal extension cables: 1m, 5m or 10m.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device has been designed to produce decorative effect lighting and is used in light show systems.
 Each LED PIPE uses 144 high efficiency leds. (Red=48, Green=48, Blue=48)
 Each LED PIPE is split up in 16 sections for maximum flexibility while programming patterns!
 A chain of LED PIPE units can be used in 3 ways:
 Standalone without controller: many wonderful build-in patterns, also music activated!
 Standalone with controller: the optional LED PIPE controller can control up to 1000 tubes with
additional flexibility.
 DMX control via controller: uses 3 DMX channels
 4 program run modes: auto mode (adjustable speed), Sound mode, dB mode (VU-meter), hold mode.
 Lightweight polymer enclosure with high quality frost lens for indoor use.
 Specially shaped base makes it possible to hide all connection cables nicely behind the units!
 Internal power supply for easy daisy chaining of up to 200 units on only one 230V/16A wall socket!
 Can be easily fixed to walls and ceilings with the supplied wall brackets.
 Suitable for indoor use only.
 Extended life span: 50.000 – 100.000 hours
 Low power consumption: only 18W per tube!
 Optional signal extension cables: 1m, 5m or 10m available.
 Perfect for use in: retail stores, commercial displays, architectural lighting, indoor decoration, clubs, pubs,
mobile DJs, trussing, ...

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 Operating instructions
 LED PIPE RGB unit

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove the top cover.
CAUTION
No user-serviceable parts inside. Refer servicing to qualified service
personnel only.
JB SYSTEMS
®
OPERATION MANUAL
1/34 LED PIPE RGB 230V
ENGLISH
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
 To protect the environment, please try to recycle the packing material as much as possible.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 Always unplug the unit when it is not used for a longer time or before servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
 Never let the power-cord come into contact with other cables!
 This fixture must be earthed to in order comply with safety regulations.
 Don't connect the unit to any dimmer pack.
 In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 The housing and the lenses must be replaced if they are visibly damaged.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Don't use the effect in the presence of persons suffering from epilepsy.
DESCRIPTION:
JB SYSTEMS
®
OPERATION MANUAL
2/34 LED PIPE RGB 230V