8.4.6.
Exp. correction
By correcting the exposure value (EV), you can adjust pictures
that would otherwise be too dark or too light.
You can set the value in 13 stages between +2.0 EV and
-2.0 EV.
Use a positive value when light conditions are poor and a nega-
tive value in strong light.
Do not use the exposure correction when the subject is in a very
bright or very dark area or if you are using the flash. In this is the
case, use the automatic setting ("0").
8.4.7.
Self-timer/operating mode
The self-timer allows you to take individual photos or one shot
using the self-timer.
Setting
OFF
ON
114 of 206
Single images are taken
A single image is taken using a 10 second
self-timer.
Meaning