Adjustment Options; System Reset - Jensen VM9022 Manual De Instrucciones

VM9022
To adjust an audio feature:
1. Use the left/right joystick buttons to highlight the audio
feature to be adjusted.
2. Press the joystick Enter button on the control panel (13)
or remote control (18) to select the highlighted option.
3. Use the joystick to adjust the selected feature to the
desired setting.
Table 3: Audio Adjustments
Function

Adjustment Options

EQ User In user mode, you can manually adjust
each of the seven frequency bands.
Acoustic Use the on-screen arrows to select a
predefined equalization curve.
Urban
Rave
Latin
Dance
Hip Hop
Rock
FAD-BAL Use this screen to adjust the output level for each
speaker in your surround system from 0 to -24dB.
You can also adjust the master volume from this
screen.
NOTE: The EQ mode will automatically change to
"USER" when individual EQ bands are adjusted.
Proper setting of the Fader and Balance complement the
effects of the cabin equalizer.
The Audio menu will automatically exit after a few seconds of
inactivity. To exit quickly, touch the top left corner of the
screen or press and hold the AUDIO button (5).
Alternate Display Options
A menu located on the left side of the screen provides
immediate access to the Equalizer, Rear Zone screen view
and PIP (Picture in Picture) features.
• EQ: Touch to view Spectrum Analyzer > Equalizer.
• REAR: Touch to view the Rear Zone screen. Control
options appear below the PIP image, depending on the
source.
DISC
AM/FM RADIO
BAND AS
SATELLITE
CAT–
CH– CH+ CAT+
• PIP: Touch to view the Rear Zone, current Front Zone,
or NAV screen. Use the left/right arrows below the PIP
image to change the PIP source.
PIP: DISC
01:02 AM
(Root)
DISC
MP3 4/84 00:00:23
E 1 Cherry Poppin Da
Q
2 Chris Isaak - Baby
R
E 3 Crazy Town - Butt
A
R
4 Phish - Birds Of A
P
5 Phish - Bouncin' R
I
P
6 Phish - Freebird (L
1/2

System Reset

To correct a system halt or other
illegal operation, use the tip of a pen
to press the reset button (12) located
on the front bottom-right corner of the unit. After a system
reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.
15
[RESET] Button