Setup Menu - Jensen VM9022 Manual De Instrucciones

VM9022

SETUP MENU

To access system settings, press the SETUP button (31) on
the remote control or touch the button on the screen to
enter the "SETUP" menu. The "GENERAL" sub-menu
appears highlighted in blue.
SETUP
RADIO RADIO
General Language Audio Speaker
RDS
Clock Mode 12 Hour
Rating
Clock Adjust 04 : 31 AM
DivX
Hardware Video Input AUTO
P.VOL
Beep On
TS Cal
Accessing Menu Items
Touch the sub-menu name or use the joystick to select a sub-
menu (Language, Audio, RDS, etc.).
The features available for adjustment under the highlighted
sub-menu option will appear in the center of the screen.
Adjusting a Feature
1. Use the touchscreen or press the /\ or V buttons on the
joystick to select the feature to be adjusted.
2. Enter the option field for the feature you want to adjust
by using the touchscreen or pressing the Enter
(joystick) button. A submenu appears in a second row
with the selected option highlighted in blue.
3. Select a new value by using the touchscreen or pressing
the /\ or V buttons on the joystick.
4. Use the touchscreen or press the Enter (joystick) button
to confirm setup.
General Sub-menu Features
Setting Options Function
Clock Mode 12 Hour Clock displays 12 hour time using
AM and PM.
24 Hour Clock displays 24 hour time up to
23:59.
Setting Options
Clock Adjust (HH:MM)
02:40
AM
Video Input NTSC
(Input cir-
cuitry autode-
PAL
tects the
video signal
Bluetooth Back
from the Aux
Auto
In source).
Beep On
Off
Language Sub-menu Features
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used.
Setting Options
OSD English
DVD Audio English
Spanish
French
DVD Subtitle English
Spanish
French
Off
Disc Menu English
Spanish
French
Audio Sub-menu Features
Function
Setting
The clock appears in the top right
corner of the screen and on the TFT
screen during certain operations. DRC
NOTE: The AM/PM indication will
change as you continue to adjust
the hour past 12.
Audio Mode
The color signals are output in the
standard NTSC format.
The color signals are output in the
standard PAL format.
The color signal output is switched Pro Logic II
automatically based on the current
video input signal - NTSC or PAL.
When turned on, an audible beep
tone confirms each function selec-
tion.
No beep sounds.
Sub. W Filter
Function
Speaker Sub-menu Features
On Screen Display appears in
•
English.
DVD Audio is heard in English
•
when the option is available.
DVD Audio is heard in Spanish
when the option is available.
DVD Audio is heard in French when
•
the option is available.
DVD subtitles automatically appear
in English when available.
DVD subtitles automatically appear
in Spanish when available.
•
DVD subtitles automatically appear
in French when available.
DVD subtitles do not appear auto-
matically.
DVD menu (if applicable) is dis-
played in English.
DVD menu (if applicable) is dis-
played in Spanish.
DVD menu (if applicable) is dis-
played in French.
17
Options Function
Off Employ the Dynamic Range Control
for better playback for low volumes.
On
Surround Choose Stereo to send the same
signal to the front and rear left/right
Stereo
speakers. If you have a center
speaker, you can choose the Sur-
round option when supported by
your media.
Music Optimized for music reproduction
when playing music encoded in
Dolby.
Movie Optimized for video reproduction
when playing movies encoded in
Dolby.
Matrix Use with Dolby Matrix encoded
media.
50Hz Selecting a crossover frequency
sets a cut-off frequency of the sub-
80Hz
woofer's LPF (low-pass filter).
100Hz
120Hz
150Hz
Choose 4 CH, 4.1 CH or 5.1 CH depending on the
speaker configuration in your vehicle.
Use the Test Tone feature to verify speaker settings.
Make changes using the EQ/FAD-BAL menu, accessed
by pressing and holding the AUDIO button (volume
control).
Subwoofer Phase Adjustment: Touch the sub.w icon to
access the subwoofer polarity controls and reverse the
subwoofer signal polarity from 0° to 180°. Reversing
polarity can improve bass response related to speaker
configuration.
Delay Setting: Delay is available when the media is
Dolby Digital encoded or digital bitstream.
• RL and RR only are available in 4.0 and 4.1 mode
• Touch the RL, RR and Cent speaker icons to access
the delay setting
• L and R Rear channels: 0 - 15 msec
• Center channel: 0 - 5 msec